Modelling Techniques
-
General
- MiTS 2 How to Load Tracing File with different Base Point
- Exporting a 3D view in the.dwg/.dxf format
- How to import platform/utility pipes from another projects?
- Blinking Entities in 3D for Clashing Entities
- How to Check ILs for Pipes/Drains after Export to IFC
- Importing PDF Files into MiTS
- Changing Survey Points Style in MiTS 2 & Civil 3D
- Sorting Element in Spread Input in Ascending/Descending Order
- How to Apply Dark Theme Feature in MiTS 3
-
Earthwork
- How to Indicate Topsoil Depth
- How To Create A Platform Within Another Platform
- How does Earthwork Module Handle Inaccuracy in input?
- How to Import As- Built
- Calculation of End Area Method in Earthwork
- EW3D End Area Method for Irregular-shaped Development Area
- Steps to Include Berm Drain Width as Part of Berm Width
- How to reduce the number of surveyor points imported from contour lines in MiTS 2
- Customization of the indication levels at all long section and cross-section
- How to Use Earthwork Master String
- Guidelines on Title Block in Cross Section, Road Horizontal and Vertical Detailing and Earthworks Cut Sections
- How to create Slanting Platform with More Advanced Features in MiTS 2
- Modelling Difference to Generate Continuous Slope in MiTS 1 and MiTS 2 (Reorder Slope)
- How to Take Higher or Lower Z Neighboring Values for Infill Platform
- Watershed Delineation in 3D View
- Using Google Earth import and Watershed Analysis to Estimate Flow Path
- How to Generate Multiple Tier of Retaining Structure Using Auto Slope Command
- How to generate different gradient for slope in Earthwork
- Scale in Cut/Cross Section Drawing in Viewport
- Solving Gap Between Two Platforms by Create Infill
- Connecting Slope Between Two Platforms
- Change Slope Ratio
- How to get platform match to the boundary completely
- How To Import Survey Points From Google Earth With Irregular Polygon
- How to distinguish the cut and fill color according to the level of excavation of the level of fills
- How to Assign Survey Points to Another Group
- Independent Gradient of Slope and Berm Drain
- Exporting Cut/Cross Section Drawing to Excel File
- Boundary Selection in CutFill Contour
- Customizing Slope Dimension for Various Berm Drain Types
- How to have different slope configurations for different slope tiers
- How To Model Sharing Slope Between Conjoined Platforms
- Previous Slope Feature
- Guide on Slope “In” & “Out”
- Calculating earthwork quantity on per soil profile layer basis
- How to Modify Slope Dimension
- Exporting Survey Point to CSV Format
- Creating Internal Road Platform in Earthwork Module
- How to Start Slope at a Certain Level?
-
Road
- How to create taper road in MES Road
- How to Set Arbitrary Low Design Radius
- Carriageway, Shoulder and Verge Gradient
- Adjustment Factor of No. of lanes on spiral length
- Shoulder High Side and Low Side of Superelevation
- Scale in Cut/Cross Section Drawing in Viewport
- How to Add Intermediate Horizontal Intersection Point (HIP)
- How to Design L-Junction
- Slope drains on the roadside for CUT and FILL area
- HOW TO USE CUTSIDE DRAIN AND FILLSIDE VERGE FEATURE IN MITS 2
- Exporting Cut/Cross Section Drawing to Excel File
- How to simulate roundabout in Road
- Open Loop in Road
- Customizing Road Width Element
- How to Create a Slip Road
-
Drain
- How to use Drainage design outside West Malaysia
- How does the length of arrow in drainage catchment affects time of overland flow
- Steps to Include Berm Drain Width as Part of Berm Width
- Cascading Drain Calculation
- How to apply customized constraint parameter to obtain shallower IL design in Drainage and Sewage
- HOW TO CREATE BENDING PIPES WITHOUT NODES
- Depth Below Invert
- Modifying IDF Coefficient in MiTS 2 and MiTS 3
- Water
- Sewer
- MSMA