If a user encounters a circumstance in which the survey point text display differs from the text z-value, as seen in the image below
![](https://i0.wp.com/mes100.com/wp-content/uploads/2022/12/Untitled-17.png?resize=958%2C762&ssl=1)
When using MiTS, user do not need to change the text or polyline z value. Instead, user can simply import the survey points into MiTS follows the text elevation rather than the z-value.
Import Follows Elevation Text #
1) To import the survey points, go to Main > Survey Points & Soil Info > Import Manage > ACAD/Text/LIDAR
2) Then, go to the drawings folder and select the survey points drawing
3) At the Survey Point Import Dialog click at the ‘Advanced Settings’
![](https://i0.wp.com/mes100.com/wp-content/uploads/2022/12/Untitled-13.png?resize=1024%2C702&ssl=1)
4) User need to tick at the ‘Elevation follows text’
![](https://i0.wp.com/mes100.com/wp-content/uploads/2022/12/Untitled-14.png?resize=1024%2C616&ssl=1)
5) Then click at import. The imported survey points then will follows the text elevation.
Import Follows Elevation Z-value #
1) To import the survey points, go to Main > Survey Points & Soil Info > Import Manage > ACAD/Text/LIDAR
2) Then, go to the drawings folder and select the survey points drawing
3) At the Survey Point Import Dialog click at the ‘Advanced Settings’
![](https://i0.wp.com/mes100.com/wp-content/uploads/2022/12/Untitled-13.png?resize=1024%2C702&ssl=1)
4) User need to untick at the ‘Elevation follows text’
![](https://i0.wp.com/mes100.com/wp-content/uploads/2022/12/Untitled-16.png?resize=1024%2C616&ssl=1)
5) Then click at import. The imported survey points will follow the z-value of the points that had been set in the drawing
Additional References #
For further refences, user may refer to the “How to Import Survey Points” User Manual