603 - 5885 1250 (4 lines) info@mes100.com
  1. Open MES Road
  2. Import the survey points. (go to road icon >> click import>> select survey drawing >> click save)
  3. Now, you will be working on ‘Road 1’ as per image shown below;                                 image01
  4. To create a roundabout, we will need to create a few IP points circling the roundabout. (please refer image below on how the IP point will be located)                               image00
  5. As per image shown above the IP is located around the roundabout and kindly note that the start and end point is located at the same point.
  6. Once all the IP points have been input, please go to horizontal alignment >> curve >> spread input image02

(please note that, you will need to change the design standard, design speed, design radius and the spiral length to suit the roundabout condition)

We provide an example of roundabout project here