New Feature
General
- Command line support implementation
- Rotate entities feature added
Clash Analysis & 3D View
- Indication for invert levels of crossing pipes/drains on long sections during clash analysis
- Auto-adjust Invert Levels (IL) to resolve clearance warnings/errors
- Measure in 3D view
- Side-by-side 3D and keyplan editing
Earthworks
- Slope template configuration
- Platform max height warnings
- Move or shift selected platforms on the input screen
- Wall Line
- Boundary selection added for CutSection
- CutFill contour boundary selection: boundary-specific results and “show within boundary only” option
- Autofix feature to delete faulty platforms
- Export cross-section elements to CSV
- Enhancing Surveyor Point Collections: Supporting Multiple Appearances
- Slope Classification for GL within Boundary created
- Specifying number of berms for the slope
Road
- Default “NTS” setting
- Chainage interval customization for horizontal and vertical alignments per road
- Information for Custom Road Width Element in Project Settings
- JKR standard cross-section templates included
- Export survey points data to CSV
- Individual pavement thickness settings for carriageways
- Cross Section to Display Surveyor Points
- Survey Data Exported Following The Road Chainage
- Customize Road Width Element Manually
- JKR Standard Typical Cross Section as A Template in Road Module
Stormwater/Drainage
- Absolute/Iterated depth below invert for sump
- Storm Water design
- Export Graph Into Excel
- Implement Textual Report for Stormwater Module
- Allow user to key in the value for catchment other than drawing out
- Clear Indication of Drain Mark and Node Mark in Excel Report
- Editable IDF Fitting Constants
- Show water level & flood level in long section for drainage
- Show center line level for utility pipe
- RHS Parameter for iterate settings of manually input drains/pipes
- Node design analysis status and output
- Customizable sump design settings
- Drainage design editor with new templates
- User-defined hydrograph input for pond analysis
- Integration of EPA SWMM software into MiTS
- Water level and flood level display on long sections
- Looping functionality for drains
- Sump design detailing
- Support for culvert linkage to drain conveyance/storage systems
- Time-area method using grid systems
Sewerage
- Absolute/Iterated depth below invert for manhole
- Manhole design detailing
- RHS Parameter for iterate settings of manually input drains/pipes
- Node design analysis status and output
Water Reticulation
- Dropdown Selection for Flow Type under Result Viewer of Water Ret
- Minor loss for water reticulation
- New headloss model: Chezy-Manning formula implemented
- Node design analysis status and output
MSMA
- IDF curve generate from rainfall intensity input by user
MCIntegrator
- Buttons to allow user to check the Part Catalog/Parts list set for the network or drawing
- Create MC Integrator 2025
Enhancements
General
- New Icons Integration
- Support AutoCAD True Color and Index Color Natively
- Implement Object Snap Settings: Geometric Centre
Clash Analysis & 3D View
- Utility analysis status highlighted in 3D view
Earthworks
- TopSoil should be automatically displayed on the CutSection and CrossSection without considering addition of OGL layer under the Cut/Cross Table
- Allowing per cut section basis for X-Interval, Y-Interval, and Distance Start value
- Verification Error when WallLine overlaps with Platform
- Allow Editing TableRow Description in EW CutSection and Road CrossSection
- Improve UserInput UI for SlopeConfiguration
- Implement Weight line for Boundary in CutFill Contour
- To display User-Define Boundaries on top of the Slope Classification Gradient
- To enable computation for As-Built boundary with Top Soil
- EW End Area Nethod: To seperate area and volume for AsBuilt areas that are located outside of boundary for each cut section
- Wall line: Additional command when right-click them
- EW: To hide generated grid line in GEarth image tracing
- Enhancement to cut section
- EW: More User friendly Platform Editor for By Points
- Cut Section layer to make available in the 3D view
- AutoFix for Incomplete Platforms due to SnapRounding
- To increase decimal places for Survey Point Adjustment Level
- Improvement for Move Platform
- Slope Sets Highlight
- Include slope are for cut and fill in DTM report
- Slope Classification Boundary Selection: Add ‘Not in Boundary’ option
- To have “Show All” for survey points option at the Terrain Tab
- Slope Template Configurations: Collapsible and Expandable sections for platform slope and wall line slope
Road
- To remove ‘Vertical Table Configuration’ from the top ribbon
- To show information on the Custom Road Width Element in Project Settings
- Cross Section Generation based on a user-defined fixed start interval and recurring interval
- Numeric Label of Carriageway
- Allowing individual level in Vertical Detailing for different road offsets and combinations
- Improvement on 3D rendering speed
- To include Shoulder Superelevation information in the report
- Highlight the topic/subject for road report
Stormwater/Drainage
- Overwriting assign drain for catchment
- Wrap sump schedule table with borderline
- Renaming column headers in Stormwater Excel Report for proper presentation of the computed values
- Tooltips for Depth Below Invert Settings – Level and Fixed Depth
- Customized Drain: To be reflected on the 3D View
- To show the selected defined customized drain under Spread Input
- Drain Analysis is separated into Analysis/Design mode at the UI level
- Drain Analysis by default will be based on Qpeak
- Verification error on incorrect drain type selected for orifice and weir in stormwater
- Verification warnings for cases where users set the Drain Link Type incorrectly in stormwater
- Improvement on the verification failure for drainage module
- To improve long section with top level of pipes and drains for better clash analysis checking
- Rename headers and remove duplicated column in Drain Excel Report
- Enhance QS report for Drain
- To increase the decimal places for Latitude and Longitude of Location Dialog
- Unit for Freeboard under Customized Drain Transect Dialog
- To move the dialog box description for customized drain
- To Separate Normal Drain and Cascading Drain in QS Report
- To include Drain/Culvert Size in KeyPlan Summary Table
- Flexibility to hide node numbering in Node Table KeyPlan
- Nodes Coordinate in report
- To show the actual size of manhole in the long section
Sewerage
- Tooltips for Depth Below Invert Settings – Level and Fixed Depth
- Improvement for QS Manhole (Detail)
- To improve long section with top level of pipes and drains for better clash analysis checking
- To include Drain/Culvert Size in KeyPlan Summary Table
- To implement same flexibility for node numbering (#12215) in Sewer and Water Reticulation Modules
- To show the actual size of manhole in the long section
Water Reticulation
- Residue Pressure enhancement at reporting
- To include velocity and headloss for pump and curve as per EPANet
- To export the coordinate in MiTS to EPANET
- To improve long section with top level of pipes and drains for better clash analysis checking
- To implement same flexibility for node numbering (#12215) in Sewer and Water Reticulation Modules
- Water ret: Indicate type of pipe in Excel report
MSMA
- Manning Coefficient should has 3 decimal points
- Enhancements of MSMA and Drain Textual Report involving CCF
- Permanent information when hover cursor on ‘i’ icon in MSMA module
MCIntegrator
- MCIntegrator update for MiTS 3
Bug Fixes
General
- Software crash when batch export
- Command Line: MeasureArea not functioning
- Remove Command Line: InputType
- Cannot Define Area to Print when click Pick button
- Software slow to respond when saving project file
- Ribbon group items not disappeared completely when button group is disable.
- Dark themes cause the status bar and theme palette unreadable
- Text of Highlighted warnings or errors under Verification Panel becomes unreadable
- The interface for clicked-on feature is hardly differentiated in latest MiTS 3
- Checkbox at RHS panel highlighted when hover the cursor on it
- RHS panel and Bottom panel in software changes color causing text unreadable
- Values not being saved after “Set to default”
- Slow time in loading the import drawing and tracing drawing into MiTS
- Got Error opening file and file is missing in Backup folder
- Software Crash When Docking Tab in Canary Mode
- Missing Tracing File with Survey Points Import
- Incomplete display of the Right-click options
- Software crash when backing up project file
- Crash in Debugging mode with coffee break when Importing Drawing File
- Unable to export drawing output to other format
- Software crash when changing between format
- Software crash when clicking ‘More Commands..’
- Software crash when clicking on the buttons under Guides section
Clash Analysis & 3D View
- 3D measurement for clash analysis insufficient clearance
- Incorrect 3D generation for node with cover top
- Cannot untick Sewage and Common options in Auto Fix Verification
- Inconsistency on the Clash Analysis vertical clearance computation
- Sump and manhole sizing is not iterated when using Analysis All Entity
- Software crash upon clicking None / DesignOverlay / ClashOverlay button for this particular project
- Vertical Clash or Clearance in long section does not reflect the values reported in Clash Analysis
- Utility Status Tab shows incorrect status
- Program is NotResponding when clicking Overlay command button in 3D View
- Clash Analysis AutoAdjust (BETA) is not working
- Software maintaining 3D View color code setting but incorrect representation on the 3D View itself
- 3D View is instantly updated but not properly updated
- Utility pipe is unclear in 3D view because it is hidden by the soil
- Nothing showing when untick/tick water level layer at 3D view
- Coffee Break message when clicking Toggle Entity in 3D View
- Software crash with coffee break message when clicking 3D View
- Original Terrain layer in 3D view oddly shown and seems like over the place
- 3D View Not Updated When Changing Node Properties
Earthworks
- Fill Area is different between Cut Section and Cross Section involving TopSoil
- Slope Classification Display option disappear
- Crash after clicking ACAD/Text/LIDAR Import when creating new project file
- Cut Sections appear empty when zoom in/out after changing intervals or offsets
- Survey Boundary Line is not showing up
- Cannot turn off survey point and boundary layer
- MasterString OffSet is not updated for ShowAll CutSection
- Some Platforms Are Not Selectable After Translation
- Road Platform is cleared during Autofix even when there’s no Verification Error/Warning
- Platform Max Height should follow slope template of the platform instead of the default slope template
- Shouldn’t Cut Section detail also being hide correspond to the boundary selected?
- Slope classification table to be shown correspond to the selected boundary
- Generating slope gave Unexpected Error with the customization of berm drain
- BermDrain configured is not displayed correctly as the Slope Drawing
- ‘Apply All’ for Selected Template Column are not working properly
- CutFill Area are not correctly presented in the CutFill Contour
- Improving Time Taken for Software to On and Off the Boundary Selections
- Retaining Structure table bug when untick the boundary selection
- Software crash when use Auto Fix button
- Extra platform line when wall slope template configuration consist of vertical drop
- Unexpected Error when running DTM calculation while DTM Contour is opened
- Retaining wall not shown after generating slope in keyplan and cutfill contour
- Unexpected error when running DTM analysis for multiple boundaries of different survey group
- Rendering of cutfill contour takes long time
- Move Corner for Platform causes software to crash
- Selected template appears empty causing software to crash
- Survey data from Text File: OK button is not available to proceed with the import
- Software Crash When Extending Cut Line
- Deleted Survey Point Icon Did Not Appear After Undo
- Extending End Area Cut Line causes software to crash
- Wall Lines cut section does not work properly without platform created
- Reorder Slope Not Working Properly
- Wall line: Verification error only displayed one by one when there is multiple overlapping wall line
- Wall line: Generated slope didn’t follow assigned direction
- Enable Slope Generation Button when Wall Line is Present
- WallLine slope generation error
- Can’t Change Slope Direction in RHS Panel
- Bugs in WallLine feature
- Platform can’t be edited or selected after move the entities by point or translation
- Some entities is not move when use move by point or translation
- New slope configuration template is not having a unique identity.
- Software crash when removing the only slope template under Project Parameters
- Imported TitleBlock file path is not appearing on the Project Parameter
- Software crash when using Create Internal Road String
- Generated slope and cutfill result from MiTS 2 did not appear when opening file in MiTS 3
- Grid Area Element Selection Using CrossPoly / WindowPoly is not functioning
- Cross-overlapping issue when generating road platform
- Slope generated outside of the boundary
- Section margin problem while no platform is defined
- Crash when generating slope
- AutoFix for “Platform does not form a valid plane” is Not Responding
- Software crash when clicking on GEarth import
- Software crash once the exported surveyor is saved
- BatchExport Cut Section is in one file instead of separate file
- Static Images for Retaining Wall are missing from the Parameters
- Verification errors on ‘Boundary intersecting with platforms’
- Incorrect CutFill Contour Generation
- Program crash, auto-exits when regenerating the slope
- Cannot press ‘C’ to complete platform
- Platform Boundary Intersection Verification Error Not Triggered
- Error in exporting CutSection using BatchExport
- Normal platform is duplicated when press C to complete a new platform
- Unexpected error when generating slope for wall lines with the presence Effective Platform
- CutFill Chrome no colour
- Software Unresponsiveness due to Out-of-range Survey Points
- Contour Line doesn’t show up when the feature has been turned on
- Changes on the Classification Button Name under EW Terrain Tab
- Reset Slope when Platform Max Height is changed in Parameter
Road
- “Sequence Contains no elements” when generating Road EndArea report
- Cannot use Add and Remove button for Custom Road Width Element
- Horz. Vert, Detailing Layout not closed when the parameter is changed
- Software Crash When Clicking Horizontal Detailing
- Software crash when click on a road branch
- Changes to Road Offset Properties at the RHS Grid are not reflected on the Cross Section
- Road Cross Section Offset is not updated when Default values are changed under Parameters
- Incorrect generation of road platform encircling a building at center
- Horizontal Alignment Start Chainage Shouldn’t Include CrossSection Initial Offset
- Highlighting Multiple Junctions Simultaneously upon Clicking in Verification Panel
- Drawing at Road Width Element Editor is not displayed
- Slope is missing from road cross sections
- Batch Export crash
- Software crash when clicking some of the elements under the Project Settings
- Program Crash when click Road End Area Report
- Topsoil area in cross section not tally with end area report
- Generated Platform Not Following Bulge
- Median Not Separated at Cross Section
- Improperly Generated Road with Missing Chainage and No Platform
- Bug in junction
- Road width entity only generate between first and second IP
- Chainage after IP 1 automatically lost after click road width
- NTS not working for road containing negative width
- Fix Minimum Radius While Retaining User Input
- Road End Area Report Show N/A value
- Slope produced beyond the project boundary
- Verge to in between carriageway
- Software Crash When Exporting Road End Area Report
- Error in exporting road Cross Section
- Error in exporting road vertical detailing
- Road Overlap When Pixel Size is 0
- Cannot close Road End Area Report using button
Stormwater/Drainage
- Duplication of Result involving a drain intersecting another drain at multiple points
- The IL displayed for a drain intersecting on another drain at multiple points are incomplete
- Incorrect dimension for Outer Diameter of Rectangle Node
- Changing a node’s CoverTop from No to Yes or vice versa apply to all nodes
- Software Crash When Saving Duplicated Sump Dimension
- Different Routing Method Generate Similar Inflow Hydrograph
- Software crash when a loop drain network is created
- Rainfall intensity didn’t change when changing CCF factor
- Newly created drain is not generated in 3D View
- Crash when click on Sump Detail
- Crash after double-click cover top
- ResultViewer highlights will be hidden once the layers are turned off based on specific module
- Cannot Snap to the centre of the node
- Analysis fails when Slope catchment is 0
- Data Points Row Could Not Be Deleted
- Node’s GL didn’t follow platform level unless there’re survey points
- Software crash when selecting customized drains defined on the Spread Input
- Customized Drain: Drain Info/ Drain Description is not displayed instantly under Project Parameters
- Customized drain: Manning coefficient value input are not instantly displayed by program
- Program crash when saving analyzed drain design
- No drain category type present in Default Settings
- Software crash when exporting to EPANET [Sequence contains no elements]
- Software crash when clicking during graph is generated
- Storm Water: Graph is generated slowly
- Stormwater: No option for textual report in batch export
- Bug when BatchExport stormwater results
- Horton’s Roughness Selection Box is Transparent
- Graph go haywire after close and reopen same project file
- Export button is disable for certain report in Stormwater
- The Rotation Feature for Drain Node is not reflected in the 3D View
- Node is not connected to any pipe error
- Storm Water Textual Report lagging
- Software crash During export in MiTS 3 without defining the file path
- Allow Drain Network Loop in Stormwater
- To Allow drain containing same nodes for both Design and Analysis in MiTS 3
- Modified Storm Event Dialog Details Could Not Be Preserved
- Software crash when ‘Apply All’ for Node & Storage Setting column
- Dialog Box Input Can’t Scrolled Down
- Improve verification error for drainage “Depth less than minimum” error
- Sump sizing computation in software
- Bug in adding new dimension for sump
- Snap is not functioning in long section
- Crossing Pipe/Drain’s IL is not display on the Long Section
- Drain Network does not appear in 3D View for specific project file
- StormWater: Using diameter from a loaded parameter changes the pipe type
- There’re 2 columns of Thickness and Freeboard for UDrain, UDrain-DWF and Block drains in Default Settings
- Selected IDF Coefficient is not shown
- Default drain is not working
- Drain Type is not following the Drain Type Default set under Project Settings
- Previous Catchment is duplicated when press ‘C’ to complete catchment
- Software is NotResponding when analyzing drain in two different projects
- Cannot Edit Drain Dimension in Analysis Mode
- Intersecting Closed Drain Displayed as Open Drain in LongSection
- Crash when click Report button
- Stormwater/Sewer Output is not auto closed when changes are made to the Depth Below Invert Settings
- Long Sections for Utility Modules could not be generated
- Software crashes when click add/remove vertex for Stormwater
Sewerage
- Changing a node’s CoverTop from No to Yes or vice versa apply to all nodes
- Crash after double-click cover top
- Cannot Snap to the centre of the node
- Node’s GL didn’t follow platform level unless there’re survey points
- Node is not connected to any pipe error
- There is no pass, warning, error layer for sewer in Input screen
- Incorrect Length for Bending Pipe
- Incorrect computation for Sewer IL Depth at Start/End under Sewer Excel Report
- Bug when click Node button after importing sewer
- Fixing End IL with Same Value Results In Different IL in Subsequent Nodes
- Analyzing Sewer Shows Warning on Having No Catchment Assigned to Drain
- Bug in adding new dimension for sump
- Snap is not functioning in long section
- Crossing Pipe/Drain’s IL is not display on the Long Section
- Stormwater/Sewer Output is not auto closed when changes are made to the Depth Below Invert Settings
- Manhole Floor Thickness Not Changeable
- Sewer Analysis Fails in the latest version
- Duplication of key description for the Sewer KeyPlan NodeTable
- Long Sections for Utility Modules could not be generated
Water Reticulation
- Cannot Snap to the centre of the node
- Node’s GL didn’t follow platform level unless there’re survey points
- Node is not connected to any pipe error
- Software crash when import water ret pipe
- Bug in adding new dimension for sump
- Water Ret: Error ‘Accessory must within the pipe!’
- Can we ignore PRV residual pressure for pressure checking?
- EPA Net button is not available/cannot be clicked
- Incorrect representation of water pipe fittings for large difference IL in 3D View and Long Section
- Snap is not functioning in long section
- Crossing Pipe/Drain’s IL is not display on the Long Section
- No outer profile generated for Water Ret node in 3D view
- Node circle is not appearing for water reticulation fittings
- Software crash when clicking on ‘…’ button for Appurtenance Profile
- Long Sections for Utility Modules could not be generated
- Only Command Line Text Box remain for water Schematic Plan
- Could not change the Fitting type under Spread Input
- Incorrect Analysis Status for Average and Fire flow Schematic plan
- Cannot analyse water ret using Darcy-Weisbach
- LoopWin analysis crash with Unexpected error ‘Sequence contains no elements’
- X-interval for Water Reticulation Long Section is not consistent
MSMA
- Cannot adjust Development Area in Pump & OSD with Pump
- IDF Coefficient Not Saved
- OSD MSMA 2 Swinburne: Missing Depth and IL information for Irregular Storage Table
- Error when analysing MSMA 1st Edition project
- Software crash when analyse existing sediment basin project
- Textual Report is not Generated
- Error when clicking on each report tab of MSMA 2 Detention Pond
- Cannot Open Project File
- Elevation Inconsistency of Road Item
- Software crash with Tc equals to infinity
- Error message only triggered for first row only
- MSMA: Crash upon clicking Analyse button
- Existing development area is not editable
- Calculate button is too big
- Report is not generated for MSMA modules
- Tc should equal to infinity when Td is infinity
MCIntegrator
- Fatal Error for Surface and Platform sync in Civil 3D 2025
- Sync From C3D to MiTS: The inner and outer diameter taken is the nominal diameter of Civil 3D Pipes
- MCIntegrator: Cannot sync pipes of different diameter in MiTS and Civil 3D