Snap Rounding Option for Road Platform: Added a new option to round the edges of road platforms for smoother transitions
Gradient Display in Cross-Section: Introduces an option to show the road gradient as a percentage in cross-sections
MSMA
Defining Pre-Development Pervious and Impervious Areas for OSD Swinburne Method: Allows users to define the pervious and impervious areas in the pre-development stage for the OSD Swinburne method
Apply CCF Factor Only to Post-Development Stage: Users can now apply the CCF factor exclusively to the post-development stage for pond designs
Specify Pervious and Impervious Area Percentages in OSD Simplified Method: Added the option to specify the percentage of pervious and impervious areas in the OSD Simplified method
Implement LandUse and Fitted Coefficients for OSD Swinburne method Secondary Otlet ARI: Introduces LandUse and Fitted Coefficients for more accurate calculations in OSD Swinburne method Secondary Outlet ARI
Include ‘Use 7-0% of PSD’ for OSD SSR Computation: Added the option to use 70% of the PSD for OSD SSR calculations
Options to Use 70% or 100% of QPre: Users can now choose to use either 70% or 100% of QPre in calculations
Enhancements
Earthworks
MasterString Centerline as CenterPoint in Cut Sections: MasterString centerline is now used as the reference point for cut sections
Error Handling for Slope Analysis Without Survey Data: Enhanced error messaging when performing slope analysis without survey data
Remove Top Soil legend from Cross-Sections and Cut Sections: Removed the Top Soil legend from cross-sections and cut sections to simplify views
Sum Cut and Fill Values in DTM Report: Added the row for the total of cut and fill values in the DTM report
Road
Out-of-Range Vertical Alignment Grades as Warning: Out-of-range vertical alignment grades are now shown as warnings rather than errors, allowing for greater flexibility in design
Sewer
Drop at Swer End Displayed in Excel Report: The drop at the sewer end is now included in the Excel report for more detailed analysis
Sewer Analysis Proceeds Despite Failure: Sewer design analysis will now proceed even if some failure occurs, providing partial results when necessary
MSMA
IDF Graph Displays All ARI Indicator Lines: The IDF graph now shows all ARI indicator lines for improved data visualization
Include Irregular Pond Dimensions Details in Report: Irregular pond dimensions details are now included in the MSMA report for more comprehensive pond design documentation
Increase Decimal Precision for MSMA Input: The number of decimal places for MSMA input fields has been increased for greater calculation accuracy
Adjustable Primary Outlet Cd in OSD MSMA 1 and Swinburne Method: The Primary Outlet Cd is now adjustable for both OSD MSMA 1 and Swinburne method.
Display Qp Value According to Selected Parameters: The Qp value now displays based on the selected parameters
Display Reduced PSD Column for 70% Qpre or 70% PSD Options: A new column for Reduced PSD is displayed 70% QPre or 70% PSD is selected for calculations
Add CCF Display Box for MSMA Fitting Constants: A display box for MSMA fitting constants, CCF has been added for easier access and reference
Bug Fixes
General
3D View Layer Edge Style: Fixed an issue where edge styles for 3D view layers were not functioning as expected
Cannot Change ‘Import Polyline’ Option in All-In-One Import: Resolved the issue preventing users from changing the ‘Import Polyline as Polyline or Line’ option during import
Slow Loading and Scrolling: Improved performance to reduce delays when loading drawings and scrolling
MiTS Fails to Launch After Installation: Fixed the issue that prevented MiTS from launching after installation
Crashing MiTS Window: Fixed a bug where the MiTS window did not close properly when ‘Save and Continue’ or ‘Continue, Dont Save’ was selected
Software Freeze: Addressed an issue where the software froze, and only the Spread Input remained responsive
Object Reference Error: Fixed an error message related to ‘Object reference not set to an instance of an object’ in certain workflows
PDF Import Scaling Issue: Resolved an issue where imported PDF files as tracing reverted to their original scale and orientation when reopened
‘Sequence Contains No Elements’ Error During Slope Analysis: Fixed the error that occurred when running slope analysis without survey data
Platform Size Issue at Boundary Line: Resolved the issue where smaller platforms were auto-created after importing a boundary
Watershed Delineation Crash: Addressed the crash that occurred when performing watershed delineation analysis
Incorrect Corner Elevation: Fixed the issue where corner elevation inputs were not reflected correctly in the Platform Editor
DTM Report Not Updating Subgrade Thickness: Fixed the issue where the DTM report did not update after changing the subgrade thickness
Missing ‘Add’ Button After Clicking ‘Edit’: Fixed the bug where the ‘Add’ button disappeared after clicking ‘Edit’
No Slope Generated at Boundary: Resolved the issue where no slope was generated when a boundary was created on all platform edges except one
Missing Cut/Fill Volume in DTM Report: Fixed an issue where the DTM report failed to display cut and fill volumes
Survey Data Import Crash: Addressed the crash that occurred when importing survey data from contour lines
Active Surveyor Point Group Change Not Reflected: Fixed the issue where changes to the Active Surveyor Point Group were not reflected on the input screen
Unexpected Error When Generating Platform: Resolved the ‘unexpected error’ when generating the platform
End Area Method Error in As-Built Cut/Fill: Fixed the ‘unexpected error’ when calculating As-Built Cut/Fill using the End Area Method
Slope Generation Errors: Fixed various errors related to slope generation, including issues with boundaries, corners, and long processing times
Interpolation Crashed: Fixed a crash caused by interpolating corner height data
End Area Report Shows #N/A: Resolved the issue where the End Area report displayed ‘#N/A’
Unable to Export Platform Without Survey Points to IFC: Fixed the issue preventing platforms without survey points from being exported to IFC files
Road
Platform Doesn’t Follow Road Width: Fixed the issue where the generated road platform did not align with the road width specification
Vertical Elevation Change Affects Shoulder Junction: Resolved an issue where changes made to vertical elevation affected shoulder line junctions
Platform Formation Issue at Junctions: Fixed a bug where platforms were incorrectly formed at junctions
Junction Platform Overlap in NTS: Resolved platform overlap issues when using NTS
Cross-Section Generation Failures: Fixed the issue where cross-sections could not be generated
Crash When Generating Road End Area Report: Addressed a crash that occurred when generating the road end area report
Incorrect Slope in Road Cross-Section: Fixed issues with incorrect slope displays in road cross-sections
Exported Vertical Alignment Only Shows Grid Lines in ACAD: Resolved an issue where exported vertical alignment only displayed grid lines in ACAD
Blinking Display When Generating Junctions: Fixed the issue of blinking display when generating junctions
Road Design Changes Not Updated in Verification Panel: Fixed the issue where changes to road design were not reflected in the verification panel
Incorrect Start/End Chainage When ‘Undo’ for Loop Roads: Fixed incorrect start and end chainage relocation when using ‘Undo’ for loop roads
File Opening Issues with Road Junctions: Resolved errors when opening project files containing end-to-end road junctions
Platform Not Generated on Junction with Overlapping: Fixed the issue where platforms were not generated when junctions overlapped
Incorrect Cross-Section label in Roaad Horizontal Plan: Corrected the display of cross-section labels in the road horizontal plan
Vertical Detailing Error During Batch Export: Fixed issues where vertical detailing failed during batch export
Elevation Changes Not Reflected in Cross-Section: Resolved issues where elevation changes to the Earthwork platform were not reflected in cross-sections
Superelevation Table Shows Reverse Crown Details Only: Fixed issues where the superelevation table only displayed details for the side with a reverse crown
Incorrect Width Display on input Screen: Fixed the issue where road entity widths displayed incorrectly on the input screen
Median Subgrade Does Not Follow Platform Line: Fixed issues where the median subgrade did not align with the platform line in cross-sections
Platform not Generated on Junction with Verge or Drain: Resolved issues where no platform was generated at junctions with fillside verge and cutside drains.
Drain
Output Not Generated Due to Velocity Out of Range: Fixed the issue where no output was generated after analysis when velocity values fell outside the acceptable range
Catchment Line Thickness Remains Unchanged: Resolved the issue where the thickness of the catchment line remained the same, even after changing the line weight
Large Drop in Drain Transition from Half-Round to Box Culvert: Fixed the issue of an exaggerated drop in drain levels when transitioning from a half-round drain to a box culvert
Inconsistent Drainage Analysis Results: Addressed inconsistencies in drainage analysis results for different scenarios
Long Import Time for Drainage Data: Improved the performance of the drainage import process to reduce import times
‘Not Enough Freedom’ Error in Cascading Drain Analysis: Fixed the error message that occurred when analysing cascading drains with fixed invert levels and gradients
Steep Gradient for Half-Round and Block Drains: Resolved the issue where excessively steep gradients were used for half-round and block drains
Incorrect Water Level Unit in Longitudinal Section: Corrected the units used for water levels in the longitudinal section to match the expected measurement units
Incorrect X-Interval in Longitudinal Section: Fixed the incorrect X-interval values displayed in the longitudinal section
Node Not Displayed with Inner and Outer Profiles: Resolved the issue where nodes were not displayed with both inner and outer profiles in drainage design
Textual Report Misalignment: Corrected the issue where textual reports were not properly aligned
Sewer
Negative Gradient when End IL is Fixed: Fixed the issue where a negative iterated gradient is used in the sewer design when the end IL was fixed
Missing Node Marking and Node Tabe in KeyPlan Export: Corrected the issue where node markings and the node table were missing in the exported KeyPlan
Incorrect X-Interval in Sewer Longitudinal Section: Fixed the issue with incorrect X-interval values in the sewer longitudinal section
Nodes Not Displayed with Inner and Outer Profiles: Resolved the issue where nodes were not displayed with both inner and outer profiles in sewerage design
Textual Report Misalignment in Sewer Design: Corrected misalignment in the textual reports for sewer design
Water Reticulation
incorrect X-Interval in Water Reticulation Longitudinal Section: Fixed the issue with incorrect X-interval values in the water reticulation longitudinal section
X Value regression in Ground Level Line: Resolved the regression issue of X values in the ground level line when viewed in the longitudinal section for water reticulation
Software Detecting Valves in Series When They Are Not: Fixed the false detection of valves connected in series that were not actually connected in series
Verification Failure for Water Pipe Type When Opening Older Projects: Corrected the verification failure issue when opening older project files in the latest version of the software, particularly for water pipe types
Incorrect table Label in Water reticulation Longitudinal Section: Fixed incorrect table labels that appeared in the longitudinal section for water reticulation
MSMA
Missing ‘Calculate’ Button in Pond Storage Tab (OSD Swinburne Method): Fixed the issue where the ‘Calculate’ button was missing in the Pond Storage tan for the OSD Swinburne method in MSMA2
Incorrect Irregular Pond Detailing in OSD Simplified and MSMA1: Resolved the incorrect detailing for irregular ponds in both the OSD Simplified method and MSMA1
Word Document Output Cannot Be Opened in Microsoft Word: Fixed the issue preventing Word document outputs from opening correctly in Microsoft Word
Incorrect Value Culvert Design Detailing: Addressed issues with incorrect detailing in culvert design, ensuring the output matches the expected outcome
Incorrect Placement of Fitting Constants in MSMA2 OSD Swinburne Report: Fixed the incorrect placement of fitting constants in the OSD Swinburne method report for MSMA2
Incorrect ARI Indicator Line in IDF Graph: Corrected the ARI indicator line in the IDF graph to reflect the correct data
Incorrect Runoff Coefficient Reference for Outlet Design in OSD MSMA1: Fixed the issue with incorrect runoff coefficient references in the OSD MSMA1 Outlet Design
Sub-Catchment Value Not Adjustable in Pond Time-Area Method: Addressed the issue where the sub-catchment value could not be adjusted in the Pond Times-Area method
Synchronized Drain Tc Does Not Follow Value from Drain Module: Fixed the issue where the Tc value for synchronized drains did not match the value set in the Drain module
Incorrect ‘Qa for Post Development’ Constants in OSD Swinburne: Fixed the issue where the ‘Qa for Post Development’ constants were displayed incorrectly in the OSD Swinburne method
Word Document Output Cannot Be Exported as .docx File: Fixed issue where Wprd document outputs could not be exported as .docx files
Input Not Saved When Reopening Project File: Resolved the issue where inputs were not saved when reopening a project file
Missing Impervious Runoff Coefficient in Pre-Development Stage (OSD Swinburne): Fixed the issue where the impervious runoff coefficient was missing in the pre-development stage for the OSD Swinburne method
Crash When Pump Type Properties Are Incomplete: Resolved the crash that occurred when incomplete pump type properties were entered in the OSD design
Lambda and Overland Flow Time Not Displayed for OSD Swinburne Method: Fixed the issue where Lambda and overland flow time were not displayed for the OSD Swinburne method
OSD with Pump Storage Sizing Calculation Error for Certain Depths: Addressed the error on storage sizing calculations for OSD with Pump, specifically for certain pond depths
Incorrect Water Level Profile for Pond in MSMA: Fixed the issue where the water level profile for ponds was displayed incorrectly in MSMA calculations
Pond Requirement Calculation Not Working: Resolved the issue where Pond Requirement calculations did not run properly in MSMA
Incorrect Message for Hydraulic Structure Not Needed: Fixed the incorrect message displayed when a hydraulic structure was not needed in OSD designs
Incorrect Tc Warning for Detention Pond: Fixed the incorrect tc warning for detention ponds in MSMA analysis
CCF Value for Secondary Outlet ARI Follows Post-Development ARI: Used own CCF value for secondary outlet ARI instead of following post-development ARI
Synchronized Pond Bottom Area Not Updating with Platform Slope Change: Resolved the issue where the pond bottom area was not updated when the synchronized pond platform slope ratio was changed
Calculation Error in Detention Pond Sizing: Fixed calculation errors related to the sizing of detention ponds
End Sump Mark Automatically Synced When Reopening Project: Resolved the issue where the End Sump Mark is automatically synced when it should not after reopening the project file
Missing ‘Calculate’ Button in OSD Simplified Pond Sizing: Fixed the issue where the ‘Calculate’ button was missing in the OSD Simplified Pond Sizing tab
Incorrect Serialization of Values in Pond Design: Corrected the serialization issues where values were not being properly saved or loaded in pond designs
Crash on Clicking Storm Duration Calculator Options: Fixed the crash that occurred when clicking the Storm Duration Calculator options
MCIntegrator
New Parameter Item Not Committed Unless ‘Enter’ Is Pressed: Fixed an issue where new items defined in the parameters could not be committed unless the user pressed ‘Enter’
