---
title: "Getting Started: Synchronizing MiTS to Civil 3D with MCIntegrator-Genabler"
description: "**Note:** This guide is **ONLY** applicable for synchronization from MiTS to Civil 3D. # **Step 1: Setting the network catalog** '***Apply Genabler Stylings***' parameter and the Genieko Part List library will only be enabled if the machine has been set…"
url: "https://mes100.com/docs/getting-started-synchronizing-mits-to-civil-3d-with-mcintegrator-genabler/"
updated: "2026-08-13"
category: "MCIntegrator-Genabler / Synchronization"
tags:
  - BIM
---

# Getting Started: Synchronizing MiTS to Civil 3D with MCIntegrator-Genabler

**Note:** This guide is **ONLY** applicable for synchronization from MiTS to Civil 3D.

# **Step 1: Setting the network catalog**

'***Apply Genabler Stylings***' parameter and the Genieko Part List library will only be enabled if the machine has been set to **Genieko Catalog**.

To do so, you may refer to the guide provided **[here](https://mes100.com/docs/uploading-genieko-network-catalog-on-a-machine/)**.

# **Step 2: Applying Genabler Stylings**

Applying Genabler Stylings automatically *styles up your drawing* by equipping it with **Genieko (Pipe Network) and GeniekoMin (Pressure Network) Part Lists**, as well as **dedicated Object and Label Styles for the road corridors and utilities profiles**.

![](https://i0.wp.com/mes100.com/wp-content/uploads/2026/08/image11-1.png?resize=925%2C400&ssl=1)

## **Steps:**

- In the Civil 3D drawing file, go to the MES Toolbar and click on 'Project'.

- The drawing file will need to be bound to a MiTS file following the steps **[here](https://mes100.com/docs/how-to-start-synchronizing-between-mits-and-civil-3d/)**.

- On the Genabler Tab, check the box next to '*Apply Genabler Stylings*'.

![](https://i0.wp.com/mes100.com/wp-content/uploads/2026/08/image20.png?resize=925%2C400&ssl=1)

- Then, the software will throw a notification, "*The drawing has not been styled up with Genabler Stylings. Proceed to Style Up the drawing?*" as in the image below. Click Yes.

![](https://i0.wp.com/mes100.com/wp-content/uploads/2026/08/image2-3.png?resize=927%2C397&ssl=1)

- The software will take a few seconds to upload the Genabler Stylings to your drawing. Once the stylings have been uploaded, the software will notify users, "*Genabler Style Up completed successfully*". Click OK to close the notification.

![](https://i0.wp.com/mes100.com/wp-content/uploads/2026/08/image36.png?resize=914%2C371&ssl=1)

- At the end of this step, please ensure the checkbox appears as in the image below.

![](https://i0.wp.com/mes100.com/wp-content/uploads/2026/08/image32.png?resize=916%2C335&ssl=1)

### *Related*

 [![](https://i0.wp.com/mes100.com/wp-content/uploads/2024/10/me-small.jpg?resize=100%2C100&ssl=1)](https://mes100.com/author/admin/)[Ngu Soon Hui](https://mes100.com/author/admin/)

I’m the [Benevolent Dictator for Life](https://en.wikipedia.org/wiki/Benevolent_dictator_for_life) for MiTS Software cum Editor of this website. Read more [here](/about-ngu-soon-hui/).

You can also contact me at soonhui@mes100.com